Radon Mitigation Cost Estimator
This radon mitigation cost estimator gives you a planning range for a radon mitigation system before you ask contractors for quotes. Choose your foundation and system type, enter your home size, and tell the tool how many suction points your home may need. The result is a budget range, not a price quoted for your home.
Radon Mitigation Cost Estimator
Answer 3 quick questions and get your mitigation cost range instantly.
1. Your home
2. Suction points
A suction point is where the vent pipe draws radon gas from below your home. Most standard homes need 1. Larger homes and homes with additions may need more.
Please note: this tool gives an estimate only, not a final quote. Testing and a certified contractor are needed for real radon problems.
How to use this estimator
First, choose the foundation and system type that best matches your home. A basement home and a crawl space home need different work, so this choice matters more than any other input. Next, enter your home size in square feet.
If you are not sure of the exact size, use your best estimate and try a slightly larger size too, so you can see how much the range moves. Last, choose the number of suction points. Start with 1 if you do not know yet, because most standard homes need only 1.
The tool then adds a set amount for each extra suction point and for a home over 2500 square feet, and shows a low and high estimate.
What rates does the estimator use
The table below shows every rate the calculator uses. The base range covers a standard system with 1 suction point in a home up to 2500 square feet. Crawl space and mixed foundation systems start higher because sealing and membrane work come before venting works well.
Each extra suction point adds 300 dollars to the low estimate and 500 dollars to the high estimate. A home over 2500 square feet adds 300 dollars to the low estimate and 500 dollars to the high estimate, because larger homes need more pipe, more sealing, and more labor time.
| Foundation and system type | Base low | Base high | Each extra suction point adds | Home over 2500 square feet adds |
|---|---|---|---|---|
| Basement, sub slab depressurization | 800 dollars | 1300 dollars | 300 dollars low, 500 dollars high | 300 dollars low, 500 dollars high |
| Slab on grade, sub slab depressurization | 800 dollars | 1300 dollars | 300 dollars low, 500 dollars high | 300 dollars low, 500 dollars high |
| Crawl space, sub membrane depressurization | 1500 dollars | 3000 dollars | 300 dollars low, 500 dollars high | 300 dollars low, 500 dollars high |
| Block wall depressurization | 1500 dollars | 3000 dollars | 300 dollars low, 500 dollars high | 300 dollars low, 500 dollars high |
| Mixed foundation, basement plus crawl space | 1800 dollars | 3500 dollars | 300 dollars low, 500 dollars high | 300 dollars low, 500 dollars high |
What the published averages say
For context, Angi reports an average radon mitigation cost of 1043 dollars, with a typical range of 805 dollars to 1326 dollars. The EPA Consumer’s Guide to Radon Reduction puts a typical system at 800 dollars to 2500 dollars, with an average near 1200 dollars. Those averages cover a standard sub slab system in a typical single family home, and larger or trickier homes can cost more.
The base range in this estimator, 800 dollars to 1300 dollars for a basement or slab home with 1 suction point, sits inside that published picture. Sources: Angi radon mitigation cost guide and the EPA radon guide. All prices are in US dollars and are national planning figures, so local prices will differ.
Check the math with two worked examples
Worked example 1: an 1800 square foot basement home with sub slab depressurization and 1 suction point. The base range is 800 dollars to 1300 dollars. There is no extra suction point, and the home is not over 2500 square feet, so nothing is added.
The result is 800 dollars to 1300 dollars. Enter basement, 1800, and 1 suction point in the estimator above and you will see the same result.
Worked example 2: a 2800 square foot crawl space home with sub membrane depressurization and 2 suction points. The base range is 1500 dollars to 3000 dollars. One extra suction point adds 300 dollars to the low estimate and 500 dollars to the high estimate, giving 1800 dollars to 3500 dollars.
A home over 2500 square feet adds 300 dollars to the low estimate and 500 dollars to the high estimate, giving 2100 dollars to 4000 dollars. The result is 2100 dollars to 4000 dollars. Enter crawl space, 2800, and 2 suction points in the estimator above and you will see the same result.
What drives the price up or down
Foundation type is the biggest price driver, followed by home size and the number of suction points. A crawl space costs more because a dirt floor must be covered with a sealed membrane before venting works well. A home with two foundation types may need more than one suction point, which also raises the price.
Pipe routing matters too. A short straight run up an outside wall is simpler than a long run through finished rooms and an attic, and that difference shows up in labor time. Local labor rates and permit rules add the final variation, so two homes with the same size can still get different quotes in different towns.
How to get a reliable quote
Test first and keep the result, because a quote without a reading is a guess. The EPA action level is 4 picocuries per liter, written as 4 pCi/L, and the EPA recommends fixing your home at that level or higher. Invite certified installers to visit, and ask each one to explain the suction point location, the pipe route, the fan model, and the vent point above the roofline.
Compare itemized quotes, not just totals, so testing, permits, sealing, and the retest after installation are all visible. Ask what happens if the first retest still shows a level at or above 4 pCi/L, and whether the follow up step is included in the original price. Hire a certified professional credentialed through the National Radon Proficiency Program or the National Radon Safety Board, or licensed under your state radon program.
Never vent radon into an attic, garage, or living space, and never rely on sealing cracks alone, because sealing alone does not fix a high reading.
Related guides
- How Much Does Radon Mitigation Cost? 2027 Price Guide
- Radon Mitigation Cost in 2026: What Homeowners Actually Pay
- How to Save Money on Radon Mitigation in 2026
- Free Home Improvement Tools
Frequently asked questions
Is this result a final quote?
No. This result is an estimate only, not a final quote. A real radon problem needs testing first and a certified contractor for the work.
Only a site visit and a radon test can price your home properly.
What is a suction point?
A suction point is where the vent pipe draws radon gas from below your home. A contractor drills through the slab, often at a sump pit, or draws from under a sealed membrane in a crawl space. The fan then pulls the gas through the pipe and vents it above the roofline.
Why does a crawl space cost more?
A dirt floor crawl space must be covered with a sealed membrane before venting works well, and vents and access points must be sealed too. That extra labor and material is why crawl space jobs sit at the higher end of the national range.
When should I fix radon in my home?
The EPA recommends fixing your home if your radon level is 4 pCi/L or higher. There is no fully safe level, since risk falls as levels fall, so a result below 4 after mitigation is a good outcome.
Does the estimate include testing and permits?
No. This estimate covers the mitigation system only. Testing, permits, and crawl space membrane work beyond the base system may sit on top of it, so ask for an itemized quote that lists every item separately.
Do I need to retest after installation?
Yes. Retest after installation, and again from time to time, especially after major changes to the home. A retest proves the system worked, and an untested system is a guess, not a result.