Building Permit Cost Estimator

This building permit cost estimator gives you a planning range for the permit fee on a home project before you file an application. Choose your project type, enter the estimated value of the work, and the tool applies a typical fee rate for that project type to your project value. The result is a budget range, not a fee quoted by your local building department.

Building Permit Cost Estimator

Answer 2 quick questions and get your permit fee range instantly.

1. Your project



Please note: this tool gives an estimate only, not a final quote. Always confirm the fee with your local building department before you file.

How to use this estimator

First, choose the project type that best matches your job. A small trade job and a new home are priced in very different ways, so this choice matters more than any other input. Next, enter the estimated value of the work, meaning the total cost of labor and materials for the permitted work, not the value of your whole house.

The tool multiplies that value by a typical fee rate for your project type and shows a low and high estimate. If your project value is only a rough guess, try the low end and the high end of your guess to see how much the permit range moves.

What fee rates does the estimator use

The table below shows every rate the calculator uses. The rates reflect the common valuation method, where a building department charges a percentage of the declared project value. Published guidance puts that percentage commonly at 0.5 percent to 2 percent of construction value for larger projects, while smaller projects carry a higher percentage because fixed office costs are spread over a smaller value.

Each rate below sits inside or near that published picture, with a minimum fee so a very small job never returns a fee lower than a real office would charge.

Project type Low rate High rate Minimum fee
Minor trade work 1.5 percent 3 percent 150 dollars
Kitchen or bathroom remodel 2 percent 4 percent 300 dollars
Room addition 1 percent 2 percent 300 dollars
Whole home renovation 1 percent 2 percent 500 dollars
New home construction 0.5 percent 1.5 percent 1000 dollars

For context, Angi reports a 2026 national average building permit cost of 1,688 dollars, based on 167 verified projects, with most homeowners paying 525 dollars to 3,114 dollars. Simple permits can cost as little as 150 dollars, while large new construction permits can reach 8,500 dollars. Sources: Angi building permit cost guide and HomeServe building permit cost guide.

All prices are in US dollars and are national planning figures, so local fees will differ.

Check the math with two worked examples

Worked example 1: a kitchen remodel with a project value of 50,000 dollars. The kitchen remodel rate is 2 percent to 4 percent. Multiply 50,000 by 2 percent to get 1,000 dollars.

Multiply 50,000 by 4 percent to get 2,000 dollars. The result is 1,000 dollars to 2,000 dollars. Enter kitchen or bathroom remodel and 50000 in the estimator above and you will see the same result.

Worked example 2: a new home with a project value of 300,000 dollars. The new home rate is 0.5 percent to 1.5 percent. Multiply 300,000 by 0.5 percent to get 1,500 dollars.

Multiply 300,000 by 1.5 percent to get 4,500 dollars. The result is 1,500 dollars to 4,500 dollars. Enter new home construction and 300000 in the estimator above and you will see the same result.

Why does the fee rate change by project type

Small jobs carry a higher percentage because the office still does the same intake, file setup, and record keeping no matter how small the job is. Large jobs carry a lower percentage because the fee is spread over a much larger project value, even though the total fee in dollars is far higher. Kitchen and bathroom remodels sit at the higher end because they usually need several trade permits and several inspections, for electrical work, plumbing work, and structural work, all inside one project.

What extra charges can sit on top of this estimate

This estimate covers the base permit fee only. Plan review is often charged as a separate item and commonly adds 50 percent to 65 percent on top of the base fee in many offices, according to the permit cost guide on this site. Separate trade permits for electrical, plumbing, or heating and cooling work each carry their own fee.

Impact fees on new construction fund roads, schools, and utilities, and can run far higher than the permit fee itself. A failed inspection can add a second inspection fee, and a permit that runs past its expiry date can add a renewal fee. Ask your building department for the all in total, not just the headline fee.

How to use your estimate before you file

Use the range to set aside the permit money before work starts, since most offices require payment before they stamp the plans. Call your building department with your project type and project value and ask for its written fee schedule, then compare that schedule with this estimate. If the office figure sits far outside this range, ask which extra charges explain the gap, such as plan review, trade permits, or impact fees.

File one complete application that covers all related work where the office allows it, because separate filings can each carry their own base fee. Never understate the project value to lower the fee, because offices compare declared values against their own tables and can correct a low value upward and delay the permit.

Related guides

Frequently asked questions

Is this result a final quote?

No. This result is an estimate only, not a final quote. Actual fees vary by local authority, and only your local building department can give you the final fee from its own fee schedule.

What is a building permit fee based on?

Most offices base the fee on the value of the work, on a flat fee for the project type, or on the size of the new floor area. Many offices mix methods, for example a flat application charge plus a valuation charge for the structure itself.

Why can the same project cost more in another town?

Each city and county sets its own fee schedule, and staff costs, code rules, and extra reviews differ from place to place. Two neighboring towns can charge very different amounts for the same project, so always check the schedule for your own town.

Does the estimate include plan review and inspections?

No. This estimate covers the base permit fee only. Plan review, separate trade permits, second inspection visits, and impact fees may sit on top of it, so ask your building department for the all in total.

Do small jobs still need a permit?

Many small jobs do, such as moving plumbing, moving electrical circuits, or changing structure. Simple cosmetic work such as painting or swapping a faucet usually does not. When in doubt, call your building department before work starts.

What happens if I build without a permit?

Your building department can issue a stop work order, charge a penalty that is often double the original fee, and require you to open finished walls so an inspector can see the work. Unpermitted work can also complicate a home sale, so filing first is almost always cheaper.