Home Improvement Cost Estimator
This home improvement cost estimator gives you a realistic budget range for a renovation before you ask a contractor for a quote. Choose your project type, enter the size in square feet, choose a finish level, and the tool multiplies your size by a published cost per square foot range for that project and finish.
Home Improvement Cost Estimator
Answer 3 quick questions and get your project budget range instantly.
1. Your project
Please note: this tool gives an estimate only, not a final quote. Always get written quotes before you commit to a project.
How to use this estimator
First, choose the project type that matches your job. A kitchen and a bedroom are priced very differently, so this choice matters more than any other input. Next, enter the size of the area you plan to renovate, in square feet.
For a single room, measure the floor area. For a whole home renovation, use the total area you plan to change, not the full size of the house if you only plan to change part of it. Last, choose a finish level.
Basic means simple materials and standard fixtures. Mid range means good quality materials and popular fixtures. High end means custom work, premium materials, and luxury fixtures.
What cost per square foot does the estimator use
The table below shows every rate the calculator uses. Each split sits inside a wider published range, so the table never invents a new price band. For general renovation, HomeAdvisor 2025 data puts renovation costs at 15 dollars to 60 dollars per square foot, with high end materials and custom work pushing to 150 dollars per square foot or more.
For room types, a 2026 guide reports kitchen costs of 150 dollars to 450 dollars per square foot, bathroom costs of 120 dollars to 350 dollars, bedroom costs of 20 dollars to 60 dollars, living room costs of 15 dollars to 40 dollars, and basement finish costs of 25 dollars to 90 dollars per square foot.
| Project type | Basic | Mid range | High end |
|---|---|---|---|
| Kitchen | 150 dollars to 200 dollars | 200 dollars to 300 dollars | 300 dollars to 450 dollars |
| Bathroom | 120 dollars to 180 dollars | 180 dollars to 250 dollars | 250 dollars to 350 dollars |
| Bedroom | 20 dollars to 30 dollars | 30 dollars to 45 dollars | 45 dollars to 60 dollars |
| Living room | 15 dollars to 25 dollars | 25 dollars to 32 dollars | 32 dollars to 40 dollars |
| Basement finish | 25 dollars to 45 dollars | 45 dollars to 65 dollars | 65 dollars to 90 dollars |
| Whole home renovation | 15 dollars to 30 dollars | 30 dollars to 60 dollars | 60 dollars to 150 dollars |
Sources: HomeAdvisor renovation costs and Home Renovation Cost Per Square Foot 2026 guide. All prices are in US dollars and are national averages, so local prices will differ.
Check the math with two worked examples
Worked example 1: a whole home renovation of 1,500 square feet at mid range. The mid range rate is 30 dollars to 60 dollars per square foot. Multiply 1,500 by 30 to get 45,000 dollars.
Multiply 1,500 by 60 to get 90,000 dollars. The result is 45,000 dollars to 90,000 dollars. Enter whole home renovation, 1500, and mid range in the estimator above and you will see the same result.
Worked example 2: a kitchen of 200 square feet at mid range. The mid range kitchen rate is 200 dollars to 300 dollars per square foot. Multiply 200 by 200 to get 40,000 dollars.
Multiply 200 by 300 to get 60,000 dollars. The result is 40,000 dollars to 60,000 dollars. Enter kitchen, 200, and mid range in the estimator above and you will see the same result.
Why does project type change the price so much
Kitchens and bathrooms cost far more per square foot than bedrooms and living rooms because plumbing, electrical work, cabinets, tile, and fixtures are packed into a small area. A bedroom mainly needs flooring, paint, and closet work. A kitchen needs cabinets, counters, appliances, plumbing, and electrical work in the same space.
That is why the same finish words give very different totals in different rooms, and why the estimator changes the rate when you change the project type.
What can push your final quote outside this range
Moving walls, moving plumbing, or moving electrical lines can add a large amount to any job. Older homes can hide damaged wiring, old pipes, or water damage that only shows up after demolition. Permit fees, inspection fees, and disposal costs may sit outside a contractor quote, so ask about them in writing.
Prices also vary by location, with large city labor often costing more than small town labor. Add a contingency fund of 10 percent to 20 percent on top of every quote, as our complete price guide recommends, so one surprise does not break your budget.
How to use your estimate to get fair quotes
Use the range as a starting point, not as a price to quote back to a contractor. Get three written quotes for the same scope, with materials, finishes, permits, and cleanup listed in each one. If all three quotes sit far above your range, your scope may be bigger than the estimator assumed, for example a full gut job rather than a refresh.
If one quote sits far below the others, check what it leaves out. Compare like with like, and choose the contractor whose written scope matches your plan, not simply the lowest number.
Related guides
- Home Improvement Costs in 2027: The Complete Price Guide
- Paint Calculator
- How to Save Money Painting a Room
Frequently asked questions
How accurate is this home improvement cost estimator?
It gives a planning range based on published national averages, not a quote for your home. Use it to set a budget and to judge whether quotes look reasonable. Your final price will depend on your area, your materials, and the condition of your home.
Why does a kitchen cost so much more per square foot than a bedroom?
A kitchen packs cabinets, counters, appliances, plumbing, and electrical work into a small area. A bedroom mainly needs flooring and paint. The published kitchen range is 150 dollars to 450 dollars per square foot, while the bedroom range is 20 dollars to 60 dollars per square foot.
Does the estimate include labor and materials?
Yes, the published per square foot ranges cover the full project total for that scope, not materials alone. Ask each contractor for an itemized quote so you can see the labor share, the materials share, and any fees separately.
What if my project is very small?
Very small projects can cost more per square foot than this estimator shows, because fixed costs like call out charges, delivery, and setup are spread over a small area. Treat the low end with extra care for jobs under 100 square feet.
Is this result a final quote?
No. This result is an estimate only, not a final quote. Only a contractor who has seen your home and your chosen materials can give you a final quote.
Do I need permits for my project?
Structural, electrical, and plumbing work usually needs permits, and permit fees vary by city. Confirm permit requirements before work starts, and check that every quote states whether permits are included.